一、 锂电池PSE认证
自2008年11月20日起,锂离子蓄电池列入NSPs的管控范围。即能量密度**过400 Wh/L的二次锂离子蓄电池(用于移动设备、桌上笔记本等)。下列锂离子电池除外:
用于医疗设备、工业设备和汽车类的锂离子电池;
用焊接或其他方式固定到产品上不能轻易移出的电池;
特殊结构的电池。
二、锂电池PSE认证测试标准
JIS C 8712 用于便携设备的密封二次电芯或电池-安全要求
JIS C 8714 用于便携式设备的小型锂离子蓄电池和蓄电池组的安全测试
三、锂电池PSE测试项目
1. Continuous low-rate charging
2. Vibration
3. Moulded case stress at high ambient temperature
4. Temperature cycling
5. Incorrect installation of a cell (nickel systems only)
6. External short circuit
7. Free fall
8. Mechanical shock
9. Thermal abuse
10. Crushing of cells
11. Low pressure
12. Overcharge for nickel systems
13. Overcharge for lithium systems
14. Forced discharge
15. Cell protection against a high charging rate (lithium systems only)
16. Free fall of batteries
17. External short circuit of batteries
18. Function of the overcharge protection of batteries
19. forced interal short-circuit test
测试项目:1)绝缘电阻试验;2)恒压持续充电试验;3)振动试验;4)高温环境下电池外壳测试;5)温度循环试验;6)外部短路试验;7)自由跌落试验;8)机械冲击试验;9)热冲击试验;10)挤压试验;11)低压试验;12)过充电试验;13)强制放电试验;14)电芯高倍率充电保护作用试验(锂体系);15)电芯强制 内部短路试验; 16)电池过充电保护功能试验;17)设备自由跌落试验。
http://zm12345670.b2b168.com